Shenzhen iStarVideo Technology Co., Limited
Enterprise, Good Faith, Combination, Innovation, Mutual Profit
Add to Cart
Gps Tracker 4G LTE Cat M for America APP Tracking Anti-Theft SOS Alarm
Main Feature: (4G GPS Tracker)
* 4G LTE Cat-1/Cat-M Communication Mode
* ZKM AT6558 GPS Location IC
* Built-in 100mAh/3.7V Battery, Support Working 1-2 Hours
* APP Application, iOS and Google Android
* Support Geo-Fence Alarm
* Support SOS Alarm
* Support Over Speed Alarm
* Support Low Battery Alarm
* Support ACC Detection
* Support Oil Cut Off
* Support Vibration Alarm
* Voltage: 9-100VDC, Suitable for All Types Of Vehicles
* IP65 Rain Proof
Functions: (4G GPS Tracker)
Remote Audio Monitoring , Remote Power/Fuel OFF , SOS Alarm , ACC Engion Detection , Power OFF Alarm , Overspeed Alarm , Vibration Alarm , Move Alarm , ACC Illegal Engion Alarm , etc.
Specification: (4G GPS Tracker)
| Model | iSV-GTY18(4G) | |
| Hardware specifications | Communication Mode | 4G LTE Cat 1/M/NB |
| Communication Band | LTE-FDD: B1/B3/B5/B7/B8/B20 (Europe) LTE-FDD: B1/B2/B3/B4/B5/B7/B8/B28/B66(America) | |
| Working Voltage | 9-100VDC | |
| Average Current | 38mA@12VDC | |
| RF Power Class | Class 5(Typ. 21dBm) | |
| RF Antenna | FPC, Built in Machine | |
| GPS IC | ZKM AT6558 | |
| GPS Antenna | 25*25*4mm, Built in high-precision ceramic antenna | |
| Backup Battery | Polymer Battery, 100mAh/3.7VDC | |
| Working Time | 1-2 hours | |
| LED Indicator | 2 LED: GPS-Blue LED, 4G-Red LED | |
| SIM Card | NANO SIM, Rotation | |
| Interface Definition | RX/TX/Power/GND/ACC/Relay/SOS1/SOS2 | |
| Waterproof | IP65, Rain Proof | |
| Working Temperature | -20°C - 75°C | |
| Operating Humidity | 5% to 95% | |
| Net Weight | 46g | |
| Product Size | LxWxT: 83*38*14mm | |
| Locate information | GPS IC | ZKM AT6558 |
| Working Current | 23mA@3.3V (BDS+GPS) | |
| Signal Reception | BDS/GPS/GLONASS/GALILEO/QZSS/SBAS | |
| Number of RF Channels | BDS+GPS+GLONASS Simultaneous Reception | |
| GPS Channels | GPS:1575.42 / BDS:1561.098 / Galieo:1575.42 / Glonass:1602 MHz | |
| Tracking Sensitivity | -162 dBm | |
| Acquisition Sensitivity | -156 dBm | |
| GPS Starting Time/TTFF | Hot Start ≤ 1 sec(open sky) | |
| Recapture: ≤ 1 sec | ||
| Cold Star: ≤ 32 sec(open sky) | ||
| GPS Position Accuracy | <10m (1σ) | |
| Timing Accuracy | <30ns (1σ) | |
| Update Frequency | Max: 10Hz | |
| Software function | Data Transmit | TCP, SMS |
| Geo-Fence Alarm | Support | |
| SOS Alarm | Support | |
| Over Speed Alarm | Support | |
| Low Battery Alarm | Support | |
| Movement Detection | Support | |
| Kilometer Report | Support | |
| ACC Detection | Support | |
| Oil Cut Off | Support | |
| Vibration Alarm | Support | |
| Service platform | History playback | Support 1 Months (Refer to the actual support time of each service platform for details) |
| APP Application | iOS and Android APP | |
Trouble Shooting:
# Cannot connect to the position server
The terminal is never online on the position server when installed at the first time. Please check the terminal:
1) If the power cables are wired correctly? Pay attention to not connect them to the controlling cables of the vehicle.
2) If the SIM card is installed correctly? Please refer to the installation instructions.
3) Check the status of the LED indicators. If the terminal is OK, the red LED and the blue LED will intermittently flick.
4) Inquiring the parameters of terminal via commands and check the accuracy of the parameters.
# Show offline status on the position server
First check if the LED indicators are OK, if cannot check them, you can check the SIM card as the following next steps:
1) Call the SIM card of the terminal and check if you can hear the connect ring.
2) Check if the vehicle is in the area where there is no GSM signal.
3) Check if one terminal or all terminals are offline in the area where terminal is offline. If all terminals are offline, you should ask the network operator to check the Internet.
4) Check if the SIM card has enough balance.
5) If the terminal becomes offline on the last day of one month, please check if GPRS is closed.
6) Inquiry the parameters of terminal via commands and check the accuracy of the parameters.